Basic Line

DSG PB

01
 - 02
DSG
DSG-PB_drawing
구형 평면 베어링 슬라이딩 스테인리스 강철, 조합 스테인리스 강철 / 베어링 황동, 시리즈 K, DIN ISO 12240-1에 따라
사용 가능한 크기
5 → 30

The Essential

DURBAL spherical-plain bearing sliding in stainless steel, combination stainless steel / bearing brass, series K, according to DIN ISO 12240-1

  • Outer ring: bearing brass with oil groove and drill holes
  • Joint ball: stainless steel, hardened, ground, polished
  • Maintenance: maintenance required, oiled on delivery, initial lubrication by the user.
  • Tolerances: see on this page
  • Temperature range: -40° C to +110° C

Special characteristics:

  • For use with high impact loads and alternating stresses in radial and axial directions,
  • Preferred in situations with large swivelling movements.

Available as a complete linkages (system) solution or with stainless steel threaded bolts. For shaft diameters from 5 mm to 30 mm.

Type d (mm) D (mm) B (mm)
DSG 05 PB 5 13 8
DSG 06 PB 6 16 9
DSG 08 PB 8 19 12
DSG 10 PB 10 22 14
DSG 12 PB 12 26 16
DSG 14 PB 14 28 19
DSG 16 PB 16 32 21
DSG 18 PB 18 35 23
DSG 20 PB 20 40 25
DSG 22 PB 22 42 28
DSG 25 PB 25 47 31
DSG 30 PB 30 55 37
3D 파일에 대한 도움이 필요하십니까?