Actuator Systems
Riem aangedreven

YZ RSMART+ZCH

Stijve Y-Z Manipulator voor matige tot hoge belasting
Beschikbare Maten
120/60 160/90 160/100 220/170

Y : R-SMART
Z : ZCH
Catalogus
Nicolas F.
“De montage van de ZC gebeurt rechtstreeks op de R-Smart loopwagen, met een hoog contactoppervlak en 6 bevestigingsschroeven, waardoor de montage zeer stijf is.”
Nicolas Floret
Technical Manager at Rollon France
Uw zoekopdracht
Quick/Advanced
The simulation you are going to carry out takes into account a cycle composed of two return trips on the Z axis and one return trip on the Y axis, without interpolation.
Environment
Strokes
(mm)
The simulated cycle takes into account one return trip on the Y axis
(mm)
The simulated cycle takes into account two return trips on the Z axis
(mm)
yz[axe_z2][stroke][tooltip]
Payload
(kg)
(mm)
(mm)
(mm)
(kg)
(mm)
(mm)
(mm)
(N)
(N)
(N)
(Nm)
(Nm)
(Nm)
(mm)
(mm)
(mm)
Workrate
(s)
The reference cycle time gives you information about the duration of your cycle for usual speed and acceleration (2m/s²)
(s)
Corresponds to a cycle composed of a go-an-back on Y axis, and two go-and-backs on Z axis
(m/s)
(m/s²)
(m/s)
(m/s²)
(m/s)
(m/s²)
(s)
Effective total cycle time achieved by your system
(m/s)
Maximal achieved speed on Y axis
(m/s²)
(m/s)
Maximal achieved speed on Z axis
(m/s²)
(m/s)
Maximal achieved speed on Z axis second stroke
(m/s²)
Lifetime (Optional)
(s)
The total pause time includes the pause time during the cycle and between two cycles
Kies uw configuratie
Dit product is niet geschikt voor uw toepassingsgegevens.
Ga naar de wereldwijde zoekopdracht om de juiste producten voor u te vinden.

Globale Gegevens

  • Beweging door middel van een lineaire geleiding met recirculerende gekooide kogels en tandriemaandrijving
  • Bestaande uit de lineaire eenheden “R-SMART” en “Modline ZCH”
  • Lichte en stijve Y-Z structuur bestaande uit geëxtrudeerde en geanodiseerde aluminium legering balken
  • Manipulator op maat gemaakt met aangepaste slag
  • Technisch dossier met berekeningsnota op verzoek verstrekt
  • Snelle en eenvoudige montage van het overbrengingsmechanisme, door middel van een expansienaaf, direct in de aandrijfkop . Vrije” positionering van de motor/tandwielkast paren in de aandrijfkop
  • Bruikbare accessoires: kabelloopwagenkettingen, verloopstukken en montagesets, sensorsteunen
ISE
ISE Department
Heb je hulp nodig met een 3D bestand?